HDMI to VGA

1. Four HDMI 1.3 input signals switched or split to four HDMI 1.3 sink devices

2.HDCP 1.2 protocol compliant

3.Support CEC

4.Support deep color 30bit, 36bit

5.Support Blue-Ray 24/50/60fs/HD-DVD/xvYCC

6.Digital audio format, as DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD

7. Support signal retiming

8.Support input up to 15metres AWG26 HDMI 1.3 standard cable length,

output up to 25metres AWG26 cable length

9.Inputs can be switched with the IR remote control，also can be controlled by four buttons.

10.Serial RS-232 remote port

11. It can smartly jump over those input sources which are not connected.

12.With the smart function of memory, it can come back to the latest status when restarted

or reconnected.

13.No loss of quality

14. Installs in minutes

15. Connect one cable from each HDMI to DVI source devices into HDMI Matrix inputs.

16. Connect one cable from each display (monitor or projector) into the HDMI Matrix  

outputs.

17. Connect 5V power supply to the HDMI 4x4 Matrix.

18. Alternatively, use an RS-232 control system to switch between sources.

19. Need DC5V/4A power supply