VGA Switch Splitter 2 in 4 out with Remote Control.

This high resolution & distinct VGA switch are designed for computer RGB image splitter. They are widely used in big screen projection，security exchange market，electrical auto-visual instruction，command & control center，multimedia conference room，ticketing platform， etc... They support one input multiple output，multiple input multiple output，the user can switch it freely. Band width 250MHz. Support the current format of the mainstream resolution VGA signal devices.

 

Specification

Signal output

Signal Type: VGA-UXGA

Interface: VGA15HDF

Output voltage: 0.7Vp-p 

Impedance: 75Ω 

Return Loss: 30dB @ 5MHz

DC compensation largest : 5mV

Synchronous

Input / output signal type: TTL 

Input voltage: 0V-5.0Vp-p: 4.0V

Output voltage: 5Vp-p  

Input impedance: 510Ω 

Output impedance: 75 Ω

Polarity Positive or negative (input)

Attention

The switch does not work?

1.Check the power indicator light, if not on, check the power supply section. 

2.Check that the HDMI Converter cable is loose or poor contact.

3.Check the VGA cable length is within the standards within 25m.

Market lug 3 +6 15 the actual needle which is very much welding cores 3 +4 or less, leading to the cascade of the company's products can not be stable or color cast phenomenon, it is recommended to purchase the device-specificline)

If you still can not be displayed, set the input signal (host) direct access to a TV or monitor to see whether or not to display properly.

Package:

VGA switch 2 in 4 out with remote control.

DC9V Power

English Manual