HDMI to VGA Converter with Ypbpr

Users who are not required by the manual operation or use of products not related to this manual, all the losses caused does not assume any liability for the manufacturer

Manufacturer retains reliability, functionality and system upgrade performance design changes, changes without prior notice.

@ The user manual of the final interpretation of all manufacturers.

Ⅰ. Introduction

HDMI to VGA is a high-definition video converter which convert HDMI digital signal to VGA analog signal and analog audio signal .HDMI signals can connect PS3, XBOX360, Blu-ray DVD, HD set-top boxes, CRT / LED Display ect. So that you can watch HD Video on the normal TV which without HDMI Interface.

    HDMI to VGA Converter applied with digital convert chip. Will convert HDMI digital signal to VGA analog signal. And the signal without any damage. Support HDMI output 1080P/1.3V.

Ⅱ. Product Features

1. No need any software, plug and play

2.All the hardware conversion processing, with images of high definition, good brightness, high image quality

3. Support HDMI1.3 version (compatible with 1.0/1.1/1.2), automatic detection HDCP

4. Small, mobile and strong

 

Ⅲ. Technical Parameters

1.HDMI enter ---- HDMI Input formats: 480P/720P / 1080I/1080P/60Hz

2.VGA output :----- VGA Output Resolution: will change with the input of the HDMI signal change.

The Converter use a single HDMI source,accessing to single VGA+SPDIF sink or single YPbPr+SPDIF sink.The Converter allows one HDMI device to be converted easily to one VGA+SPIDF or one YPbPr+SPIDF/R+L monitor or projector.

 

Our devices offers solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.

 

One HDMI input signal convert to one YPbPr+SPDIF+R/L or VGA+SPDIF sink device

Support video input : HDMI 1.2a

Support audio output : SPDIF(Optical)+ R/L analog .

Support output: Support up to UXGA and 1080P(50/60Hz),the same format as input

HDCP 1.2 protocol compliant

LED indication : when source or sink is working, LED relative to is light.

No loss of quality

Installs in minutes

Need DC5V/0.8A power supply

 

CONNECTING AND OPERATING

1. Connect one cable from HDMI1.2 sink into the Converter input.

2. ConnectVGA+SPDIF or YPbPr+SPDIF from monitor or projector into Converter outputs.

3. Connect 5V power supply to the HDCRBG0102 Converter.

 

SPECIFICATIONS:            

 

HDMI resolution ………… HDMI Cable 1.2a

InputVideo signal ………….0.5~1.5Volts p-p

Input DDC signal ………5Volts p-p (TTL)

VGA or YPbPr output………Support up to UXGA and 1080p(60Hz)

Audio output.........R/L Analog and optical

Max transmission bandwidth.....5.1Gbps

Max working current…………600mA

Power adapter format…….Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/0.8A

Operating Temperature range……........(-15 to +55°C)

Operating Humidity range…………5 to 90%RH (No Condensation)

Dimension (L x W x H)...............174x70x20 (mm)